Description

Xiegu VG4 7.5M 4-Band Base Station Vertical Antenna For HF Transceiver Description Our SKU: 10248170200 Item Brand: radioddity Item MPN: Xiegu VG4 antenna is a 4-band GP type and is made of aluminum alloy with anti-oxidation surface. It is light, solid, and easy to install. It is with good outdoor weather ability. After the normal installation without needing extra guying, it can resist Category One Hurricane. Features: 4-Band Vertical Antenna: The VG4 is a 4-band Ground Plane type antenna made of aluminum alloy with an anti-oxidation coating. It covers 40/20/15/10 meters. The user trims the antenna to the part of the band as needed. Automatic band switching: The antenna has a single coax cable feed however each band is individually tuned with a low VSWR across the band. Through fine-tuning, the best (rock-bottom) SWR can be achieved on the user s choice of frequency within the band. The band selection is 100% automatic through the single feed, just switch bands on the radio. No extra ground peg or radials are needed: The antenna has its own effective counterpoise replacing the need for radial wires. Physical: This antenna is light, but built to last and is easy to install. Suitable even for homes with only a small space available. It is perfect for roof, patio, small backyard, condo and motorhome installation. Top loading: Parallel resonators are used to give the best vertical-element efficiency. End loading of the lower HF band sections (capacitive hats) allow efficient operation with a reduced antenna height. Outdoor weather ability: The VG4 is rated for high wind environments. After a normal installation, it can resist a category one hurricane with no guying required. Specifications: Use frequency band: 7/14/21/28MHz (40m/20m/15m/10m) Axial length: about 7.8m | 25.6ft Radial length: about 2.7m | 8.8ft Maximum power handling: 1000W PEP (CW500W, RTTY300W) Antenna impedance: 50 VSWR 1.5:1 Antenna bandwidth: 40m: 150kHz / 20m: 450kHz / 15m: 800kHz / 10m: 1000kHz Rated wind speed: 35 m/s Antenna interface type: SL16-K Weight: about 7.0kg | 15.4lb Package size: 13x13x120cm | 0.4x0.4x3.9ft Erection height: the distance from the ground is more than 3m (10ft) Please let us know if you have any questions regarding a past or future purchase. Check out our entire store for more great products and deals!! Warranty Our inventory is purchased from various different manufacturers, retailers, and 3rd party sources. We do not represent or make any claim regarding any manufacturers warranty. We do however make every possible attempt to accurately describe the inventory we sell and stand behind it. We offer a no-questions asked 30-day return policy on everything we sell if the item is in the same condition it was sold in. If you have any issues at all with your purchase please feel free to contact us, we want to make it right!! Shipping All items are carefully packed and properly protected for shipment. We use several different carriers and choose the most economical for the item and destination based on the estimated handling and transit time. Please make every attempt possible to verify that part/product being purchased is correct for your application In the event of shipping damage, item not as expected, or any other reason to desire to return the product, please feel to contact us. At this time we do not offer internation shipping. About 8TEN Industries Since 2016, 8TEN Industries has been a leading asset recovery provider supporting national retailers, brands, and manufacturers. Our 60,000 square foot processing and distribution facility located in Cass City, Michigan has allowed us to become industry leader in turning difficult problems for manufacturers into great deals for our customers. More Items Store Contact Follow Us 8TEN Industries