Description

This is perfect for indoor, or even temporary outdoor, use for the 1/2 inch copper J-pole that I, and some of my competitors make. If you want to make it yourself, here is what you need: 1.5 inch thick pine base (8x8 inches square) table saw to cut the pine board router to round the edges 3/4 inch pipe flange to hold the antenna electric drill to drill the holes for the screws to attach to the pine board 3/4 inch PVC pipe to insert in the pipe flange miter saw to cut the PVC pipe orbital sander to smooth the pine board before attaching the pipe flange etc. etc. etc. Making this isn't rocket science....be my guest....HOWEVER if you don't have all the above tools, you can order it for me !!!! Seriously, thanks for putting up with my humor and I look forward to sending you one that I made so you don't have to purchase all the tools mentioned above, unless you don't have enough tools and want to use this as an excuse for expanding your tool collection. Thanks and 73 Cliff KC0SDV Check me out on QRZ