Description

Listing is for one LDG AT-200PC. This model is intended for computer or remote control. Software is available on the internet including source code. The AT-200PC will handle up to 250 watts SSB or CW on 1.8 – 30 MHz, and 100 watts on 54 MHz. It features LDG’s state-of-the-art, processor-controlled Switched-L tuner. It will match virtually any kind of coax-fed antenna, including Yagis, dipoles, inverted Vs, slopers, loops, just about anything. It will typically match a 10:1 SWR down to 1.5:1 in just a few seconds. You can also use the AT-200PC with longwires, random wires and antennas fed with ladder line with the optional LDG balun. The AT-200PC includes an internal antenna switch, controlled from the PC, that lets you select between two different antennas. • 5 to 250 watts SSB and CW. (100 watts on 6M) • 16,000 3D memories for instantaneous band changing • Two position antenna switch with memories for four antennas on each position • Tuning time: 0.5 to 6 seconds full tune, < 0.1 second memory tune • Built in frequency counter for memory operation • Frequency coverage: 1.8 to 54.0 MHz. • Tunes 6 to 1000 ohm loads (16 to 150 ohms on 6M), 6 to 4000 ohms with optional 4:1 Balun (LDG RBA 4-1) • For Dipoles, Verticals, Vs, Beams or and Coax Fed Antenna • Optional external Balun allows tuning of random length, long wire or ladder line fed antennas • MARS/ALE Compatible • USB or Serial Connection • Flash-Upgradeable Firmware • Includes Control Software, 10-foot serial cable, USB interface, and power cord. • Power requirements: 11 to 16 volts DC at 750 mA max • Enclosure: 8.5 x 6.0 x 2.0 inches • Weight: 2 pounds