Description

Portable, easy to assemble, great performing GMRS ground plane antenna Great for a camp site, attic, emergency, or permanent base station No ground or counterpoise required. No issues with RF back into the shack or coax conducting. Lower angle of radiation that a 3/4 or 5/8 wave ground plane as well as no power robbing inductors or capacitors Easy to mount anywhere, weighs less than 2 ounces 2.1-2.8 DBI of gain. Covers whole GMRS band with under a 1.5:1 VSWR Comes with easy assembly instructions These are built with solid 3d printed insulators/supports and hard drawn unpolished solid stainless steel elements All joints are crimped and soldered for low resistance and longevity. Industry standard SO-239 connector for direct connection to your coax. Mounting is easy with zip ties or hose clamps around the coax connector itself or on top of a piece of small 3/4 inch pipe that the connector will slide into. (these are so small and light they need no specific mount) These ship partially assembled, and will require simply mounting the ground radials and tightening 4 screws. This can be done in a couple minutes Lifetime technical support is always available for any of my customers by email, messaging, or telephone Tripod shown in photos is not included