-40%
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz
DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz

DX Engineering RR8A-HP and CC-8A Remote Coax Switch 8 position 5KW+ 1.8-150 MHz

$ 263.98

  • Brand: DX Engineering
  • Compatible Brand: DXE
  • MPN: RR8A-HP
  • To Fit: Ham Radio Antennas
  • Type: Switch

Description

The best remote coax switch you can buy! Just look at those specs below. This is truly the last remote coax switch you will ever need. Just look at the power handling and isolation! Look at how clean both the outside switch box and control boxes are. See pictures, you get the RR8A-HP external switchbox and CC-8A in-shack controller as shown. If you were to buy this new remote coax switch and controller box new from DXE, the cost for both is $786!! This is BETTER THAN NEW. Yeah, $499.95 is better than $786. WHY? Because the performance is the exact same - just less expensive! DXE Part Number: DXE-RR8A-HP Remote Antenna Switch Ports: Eight, SO-239 Remote Antenna Switch RF Input: Single, SO-239 Remote Antenna Switch Power Handling: 5 kW key-down Remote Antenna Switch Port Isolation: -70 dB Remote Antenna Switch Control Connector: 1 of 8, removable Remote Antenna Switch Frequency Coverage: 0-54 MHz Relay Unit Control Cable Connection: External Remote Antenna Switch Width: 10.375 in. Remote Antenna Switch Height: 4.375 in. Remote Antenna Switch Depth: 9.875 in. Quantity: Sold individually. DX Engineering RR8A-HP Remote Antenna Switches DX Engineering RR8A-HP remote antenna switches are low-to-medium power RF antenna switches with excellent performance on HF and 6 meters, usable to 150 MHz. They use 16 custom, sealed, moisture-resistant relays to provide the best port-to-port isolation available and reliable, long-term performance. RR8A-HP switches can be used as a conventional one-of-eight antenna switches or configured to simultaneously select multiple output ports, allowing for their use in complex antenna phasing and stacking systems. DX Engineering RR8A-HP switches use a removable screw-terminal control cable plug that greatly simplifies installation by eliminating the need for disassembly or soldering to wire the control lines. The remote relay boxes are custom-made from a stainless steel chassis and a special RF shielded stainless steel cover. There is also a custom conductive gasket to complete the seal between the cover and stainless steel housing base. Features include: * Fully RF shielded with stainless steel mounting bracket and hardware * Best port-to-port isolation available: >70 dB below 30 MHz, >60 dB below 60 MHz, >45 dB below 150 MHz * Loss: <0.03 dB below 60 MHz, <0.25 dB below 150 MHz * High-RF tolerant, Amphenol UHF connectors * Shorted or open selection of unused antenna ports * Sealed 20 ampere RF-rated relays * Safe 12 Vdc relay operation * Lightning protection on control lines * External quick-connect plug for control lines * Reliable operation in weather extremes