Description

4:1 remote antenna switch DIY KIT. Many Ham's around the world use this antenna switch and were convinced of his excellent work. The PCB is specially designed for low loss , high antenna isolation and low SWR . This has been tested and works well at the full legal limit . Frequency range from 1.8 to 60 MHz. The kit contains all the necessary parts to assemble the antenna remote switch. After assembly, you only need to connect the control cable from the control panel (cable and control panel are not included). Antenna switch DIY KIT has full complete parts: Сircuit board (M0AGX) - 1pcs Waterproof plastic box - 1pcs Relay RT314012 or analog (12V, switching current 16A) - 4pcs Socket SO-239 - 5pcs Hermetic socket for the control cable - 1pcs Diode SM4007 (or 1N4148) - 4pcs Screw M3x16 - 20pcs N ut M3 - 40pcs Washer M3 - 40pcs Lock washer - 40pcs You need to install details in the box and to solder as on the schematic. To get the antenna switch worked you have to do some soldering works with a cables and wires. Probably some instruments would be required . Shipping We ship Worldwide by Airmail with trucking. Typical shipping time: EUROPE 2-4 weeks USA, Canada 3-6 weeks Africa, South America, Asia, Australia 4-8 weeks. Note! Please understand that the package maybe delayed due to reasons outside of our control, like weather, holidays or shipping errors. We appreciate your patience but if you have not received package in the time stated above, please feel free to contact us through eBay message. We will try our best to solve the problem for you.