-40%
Broad Wide Band Stainless Base Antenna 144-1290MHz Discone Scanner Ham 1410 Tram
Broad Wide Band Stainless Base Antenna 144-1290MHz Discone Scanner Ham 1410 Tram
Broad Wide Band Stainless Base Antenna 144-1290MHz Discone Scanner Ham 1410 Tram
Broad Wide Band Stainless Base Antenna 144-1290MHz Discone Scanner Ham 1410 Tram
Broad Wide Band Stainless Base Antenna 144-1290MHz Discone Scanner Ham 1410 Tram

Broad Wide Band Stainless Base Antenna 144-1290MHz Discone Scanner Ham 1410 Tram

$ 26.4

  • Band: UHF, VHF, 900MHz, 1290MHz
  • Brand: TRAM
  • Color: Silver
  • Compatible Brand: Universal
  • Compatible Product: Scanner
  • Country/Region of Manufacture: Taiwan
  • Custom Bundle: No
  • Directivity: Omni-Directional
  • Features: Radio
  • Frequency Band(s): 25-1300 MHz
  • Item Weight: 3 lb
  • MPN: 1410
  • Material: Stainless steel
  • Model: 1410
  • Modified Item: No
  • Number of Inputs: 1
  • Number of Outputs: 1
  • To Fit: Base Station Radio
  • Type: Antenna
  • UPC: 727932014577
  • gtin13: 727932014577

Description

Broad band stainless steel base antenna. Wide band reception covering 25-1300MHz Transmit bands 144-220-440-900-1290 MHz. Max power 200W 8 lower radials 32" 8 upper radials 10 1/2" Rust free all stainless steel structure SWR 1.5:1 max UHF (SO239) connector 1 3/8" (35mm) maximum mast diameter required for installation (not included) Coaxial cable (RG213, LMR240) terminated with a PL259 connector required (not included) Installation instructions: Screw the radial nuts all the way onto the 8 upper radials and the 8 lower radials as far as they will go. Screw the 8 upper radials (2) into the top holes of the coil/base horizontally. Hand tighten all the way in. Screw the radial nuts toward coil/base and tighten with a wrench (not supplied). Screw the 8 lower radials into the lower holes in the middle section of the coil/base at a 45 degree angle. Hand tighten all the way in. Screw the radial nuts toward coil/base and tighten with a wrench (not supplied). Loosen the 2 set screws at the bottom of the coil/base before you mount the antenna. Run coax cable up through 1-1 3/8" OD mast and connect PL259 connector to the antenna, then tighten the antenna hub to the mast. We combine shipping. Please email or request a revised total from us if the calculated shipping does not look correct!!!