Description

3D printed water thigh housing with a SO-239 connector, 2 insulators, and 4 tie wraps to secure the wire to the insulators after tunning antenna (if needed). This 40 / 15-meter dipole antenna has a total length of 70 ft.(35ft each side), 7MHZ 1/2 wavelength; can be tune from 40-meter band or higher. Using 16AWG multi-string wire, recommended up to 500Watts output. The center section is 2.610" wide x 2.650" high x 1.420" deep with a .385" hole on the top section for mounting option. The insulators are one solid piece with a channel to loop and secure you antenna wire, 3.130" long x 1.180" wide x 1.0" deep, and a .385 hole to mount. This antenna is also a great all band shortwave radio / Ham receiving antenna! Can be installed as a inverted V for omni directional receiving and transmitting. Recommended Hight of 25 to 30 feet if possible. If you have any question or will like a lower frequency antenna, please feel free to contact me. Thanks for stopping by.