Description

222 to 225 MHz 4 Element Antenna Model # 222-4Y-SO Don't waste your hard earned money on some foreign made antenna. Buy American ! Tired of that J-Pole just not making the trip to distant stations or repeaters. Now's your chance to be heard ! This listing is for a single (1) 1.25 meter (222-225 MHz) 4 element antenna. (rear mount) This is not your standard or light duty antenna sold by other manufactures. This is a heavy duty antenna designed, built and tested right here in the USA for all types of weather. No whimpy elements on this antenna. I use 5/16" diameter which are stronger and have more surface area. The boom is made from 3/8" x 3/4" solid 6061 aluminum bar stock. Built to last for years to come. Rover/mobile tested at or above highway speeds. Works great for VHF/UHF contests too. Great for mounting on a rover/mobile or base station. Or for someone that wants a small inside the attic antenna. Designed for use on all modes,like digital modes FT4/FT8 as well as CW and SSB and FM or AM Can be mounted on a mast pipe or mounted right to the side of your Rohn 25 tower. Mounts vertical for FM use or horizontal for CW/SSB use. No tower offset required. ======================================================================================= Description: Model # ----------------------- 222-4Y-SO Boom:-------------------------- 3/8" x 3/4" x 36" solid 6061 aluminum Elements:---------------------- 5/16 inch diameter 6061 aluminum solid rod Usable Frequency:--------- 222 to 225 MHz SWR:--------------------------- Less than 1.3 to 1 (222 to 225 MHz) Directivity:--------------------- Directional Polarity:------------------------ Mounts Horizontal or Vertical Impedance:------------------- 50 Ohms Tuning:------------------------- Gamma Match Power rating:----------------- 800 watts ssb single/1.5Kw ssb stacked pair Coax connection:------------ SO-239 Silver plated connector (female) Mast Clamp:------------------ 1-1/2 inch zinc plated U-bolt type with aluminum saddle Gain figures:----------------- Forward 7.9 dBi ---Front to back--- 20.1 dB (Subtract 2.14 from dBi for dBd) Beam Width:----------------- E=56° H=67° Shipping weight:------------- 4 lbs. Minimum mounting height above ground: = 12 feet ====================================================================================================== This antenna uses a gamma match for tuning. You do not need a balun or coil of coax at or near the antenna. An Allen wrench is provided for assembly and adjusting the swr. Comes in kit form. Step by step assembly manual is included. I ship through UPS ground only to the lower 48 states. You must have a real address. No P.O. Boxes !!! Shipping costs have gone up and are now $20 to $24 yet I'm only charging you $19 until January 1st 2024. Payment can be made using whatever type of payment ebay accepts. * No need to purchase a big expensive rotator. A standard TV antenna rotator can turn this yagi.